Mega Dial LED Dialboard V2 ~ Chrome

You have 1000 characters left.

Price: $429.99

Availability: in stock

Prod. Code: GDBCRMD

Tags: Electrical (Racepak, Delay Boxes, Buttons/Switches, Shift Lights, Batteries)

The Digital Delay Mega Dial is the newest generation of Dial-Boards sold at close to ½ the price of some of their competitors'. This Dial-Board package comes with a chrome case for the LED Board and black powdercoated case for the control head. The Dial-Board is available with either redbluegreen, orange, or white LEDs. Be sure to click on the picture to see the enlarged images. With this LED display dial-board you can avoid dial-in errors, and have the option to change your dial-in, right up to the last second. This unit is available in Black!

Mega Dial is a two piece unit. Both the Control Head and the Display Board require 12v or 16v power and ground to operate. (also included is a 14' telephone cord that is used to send information between the two units.). The Control Head is typically placed near the rider/driver, and the Display Board is mounted to face the tower. This is independent and works alongside any delay box, throttle stop, or ignition.

We also have the only board with the "LOCK" feature, which will lock the dial value in memory. You can now avoid changing a dial-in by mistakenly hitting the Control Box.

Another benefit of Mega Dial's design over our competitors is a very low current draw, so it can be connected to the master switch with no concern of having to turn it off between rounds. It draws less than ½ amp in when set to bright, and less than ¼ amp when set to dim. Some of competitor boards can draw up to 6 amps.

Mega Dial also has the ability to store two times in memory, called "Time 1" and "Time 2", allowing for large number changes without a lot of time wasted scrolling. This can be beneficial for ¼ mile and 1/8 mile racers, they can store 2 different dial ins.

Be sure to click on the picture to see an enlarged image.


Features / Specifications

  • Board Size: 9-1/2" x 5-1/2" x 1-1/4"

  • Mounting Holes - Left to Right (8.75"), Top to Bottom (3")

  • Range: 0.00 to 19.99

  • Board is mounted and protected in an aluminum enclosure

  • The LED numbers can be seen in direct sunlight

  • Bright / Dim feature for day / night racing (set on the Control Head)

  • 12 or 16 volt compatible